Skip to main content
Health Services

Personal Protective Equipment

Personal protective equipment (PPE) maintains a barrier between you and any potentially infectious material. A hazard assessment is to be performed to determine the risks posed by a task and the necessary precautions and PPE to use to avoid exposure. PPE must be readily accessible and appropriate for the tasks performed. All PPE is supplied by BYU—Hawaii at no charge to the employee or student.

General rules to follow

  • Always wear the assigned PPE in exposure situations.
  • Remove PPE that is torn or punctured, or has lost its ability to function as a barrier to bloodborne pathogens and replace with intact PPE.
  • Remove PPE before leaving the work area.

    Types of PPE

    Gloves

    Gloves should be made of water-impervious materials. The fact that latex gloves can trigger allergies should be taken into consideration when choosing gloves or other PPE materials. If glove material is thin or flimsy, double gloving can provide an additional layer of protection. Also, if you know you have cuts or sores on your hands, you should cover these with a bandage or similar protection before donning gloves. You should always inspect your gloves for tears or punctures before putting them on. If a glove is damaged, don't use it! When taking used gloves, or other PPE, off make sure you do not touch the outside of your PPE with any bare skin.

    Goggles

    Anytime there is a risk of splashing or misting of contaminated fluids, goggles or other eye protection should be used to protect your eyes.

    Face Shields

    Face shields may be worn in addition to goggles to provide additional face protection. A face shield will protect against splashes to the nose and mouth. Again, bloodborne pathogens can be transmitted through the thin membranes of the eyes, nose, and mouth so it is important to protect them. Splashing could occur while cleaning up a spill, during laboratory procedures, or while providing first aid or medical assistance.

    Aprons/Lab Coats

    Aprons, lab coats or protective suits may be worn to protect your clothing and to keep the blood or other contaminated fluids from soaking through to your skin.

    Foot Protection

    Shoe covers may be required depending on the extent of the exposure risk.

    Contaminated PPE and Clothing

    Contaminated PPE and clothing should not be removed from the worksite. Contaminated PPE and clothing should be handled as little as possible and placed in an appropriately labeled bag or container until it is decontaminated, disposed of, or laundered. It is important to find out where these bags or containers are located in your area before beginning your work. Normal clothing that becomes contaminated with blood should be removed as soon as possible because fluids can seep through the cloth and come into contact with skin.

    Proceed to next module